Monday, February 11, 2013

DIY Twin Daybed Ensemble - Saved $205!


What Prompts Me to DIY
Slightly better than duvet covers, daybed covers that suits your home decor is very difficult to find. I've been searching for a good and pretty one over the last 7 years but still am not satisfied. I can find styles that I like but never the pattern. What makes my choice even more limited is that I only want the ones that is a one-piece drop from the mattress all the way to the floor, as opposed to having to manage a separate fitted sheet, a bedskirt, and then a quilted cover. Too much work. Too difficult to change. Then this daybed that I have is in the nursery together with the cribs - so I can stay overnight with them when needed. I cannot find ANY that has a nursery theme. I'm not looking for nursery prints, but perhaps a pastel color and simple pattern? Non-existent! The closest set that I can find is one on JCPenney for $200, but then it's much too "grandma" than "grand baby". Then, I will have to get a separate non-matching duvet cover for the comforter. The fact is, that I have never been able to find a matching set of daybed cover and duvet cover!

Since I just made the 2 Toddler Duvet Cover Sets, here I go again.

Project
Twin Daybed Cover + Twin Duvet Cover + 2 Pillowcases

Materials
Fabric - Blizzard Anti-Pill Print Fleece 58" Wide, Color Green White Dots, 8.5 Yds
(1) 30" Zipper (salvaged from an old ugly duvet cover that I'm throwing away)

Size
Daybed Cover: 38" Wide x 75" Long x 21" Dropped Front to fit Twin Mattress 38"x75"x7"
Duvet Cover: 60"x84" to fit my 20-Year-New Down Comforter
Pillowcases: 20"x28" to fit Standard Twin Pillows

Time & Cost
Project Time: 7.75 Hr
Cost: $55 (Daybed Cover + 2 Pillowcases + Duvet Cover)
Closest Alternative: JCPenney Marianna Daybed Cover & Accessories - $260 (Daybed Cover + 2 Pillowcase + Non-Matching Duvet Cover)

What
I choose fleece because:
  1. It can double as a summer time blanket if you take the insert out. In winter time, use it as a regular duvet with down comforter inside.
  2. It's easy to cut and hem because fleece cut edges don't flake like other fabrics. You can save yourself a lot of work without having to double hem the edges.
  3. It is thick enough in itself that edge cording is not aesthetically necessary. Save work, save money, and looks better!
  4. It matches the 2 toddler duvet sets that I just made!
I found an old ugly Grandma-style pink floral pattern duvet cover tucked up somewhere in the closet. I wouldn't give a second thought to throw it away. I won't even use the fabric for anything else other than rags, but I salvaged the 30" long zipper which is in perfect condition after I don't even know how many years. A zipper is a zipper. Plus, it's going to be hidden anyways. If you don't have any reusable zippers, you can always get a basic one, anywhere from 20" to 30" long, at Joann for about $3.

How
This fleece is marked as 58" wide, but really measures 60" excluding the loom edges on both sides.

Here is how it should be cut:
First cut out the biggest 14'  panel for the duvet cover.
Then 20" for a pillowcase. See below for the remaining 118" panel.
The middle T-shaped panel is the bulk of the daybed cover.
You only need to cut away the two 21"x21"  squares on the lower corners.
Further cut up the 21-Squares into 4 small patches that will make up the back drop.
Duvet Cover
  1. Fold in half along the 14' edge, RS to RS, pin along a 14' edge and a 5' edge to stabilize.
  2. Pin zipper centered on the remaining 14' edge, RS to RS, sew on WS as close to zipper as possible.
  3. Pin zipper on the opposite 14' edge, RS to RS, sew on WS as close to zipper as possible.
  4. Sew across both ends of zipper to secure. Sew fabric close 1" from end of zipper to the end of fabric. (Thus hiding the zipper behind the fabric.)
  5. Sew close the other pinned 14' and 5' edges using 1/2" seam allowance.
  6. Flip inside out. Done!
Pillowcase (Makes 2)
  1. Cut length of Pillowcase panel above to 57" long.
  2. Fold in half along 57" edge, RS to RS, pin along both 28.5" edges. Sew on WS using 1/2" seam allowance.
  3. Fold hem and sew along opening edge on WS using 1/2" seam allowance.
  4. Flip inside out. First one done!
  5. Use the leftover panel from the Toddler Duvet Cover & Pillowcase Project to make the second pillowcase.
Daybed Cover
  1. Sew the 4 Back panels lengthwise to make a long 10.5"x76", using 1/2" allowances. This will constitute the Back Drop panel. (You can always buy extra fabric to skip this step, but it will be an awful lot of wasted material compared to a rather simple patched panel that's only the back side of the daybed)
  2. Pin the Back Drop panel centered on the 118" edge. Sew on WS using 1/2" allowance.
  3.  The next step requires a little imagination. Here's a guideline:
First pinch the 4 red corners together and align them RS to RS. Sew on the WS down from the pinched corner for 7" (which is the depth of the mattress) using 1/2" allowance, thus forming a box/lid shaped cover for the mattress. Sew a few extra stitches at the pinched corner to strengthen.
Then fold and hem all the rest of the edges marked hem using 1/2" allowance.
All done!


Tips
  1. As usual, buy fabric at Joann when they are 50% off, which happens a lot. Buy at store if you can, that way you can take advantage of those 15% or 20% off entire order (include sale items) coupons that they send you in the mail. This takes it down from $11/yd to just $4.4/yd.
  2. Since this is fleece, you don't need to double fold to hem because there isn't any raw edges. You can simple fold 1/2" into the WS along the edge and sew it close.

Daybed Bedding Ideas


5 comments:

  1. Great post and very helpful! Like you, I can't find a cover that fits my needs and budget. I've made a king size spread so compared to that monster, this should be a piece of cake. Thanks for providing the direction I needed.

    ReplyDelete
  2. Some folks have a high sheet over the beds. If you employ the "euro style" style for creating your bed while bed linen
    not employing a high sheet the cover cowl and bed sheets
    sleepers, recognize that you just can ought to do the improvement additional typically.

    ReplyDelete
  3. Thanks for sharing this! I've found plenty of these online but they are all made out of quilted fabric and I want a smoother fabric for the room.

    ReplyDelete
  4. Thanks for the nice blog. It was very useful for me. Keep sharing such ideas in the future as well. This was actually what I was looking for and I am glad to came here! Thanks for sharing the such information with us
    linen curtains

    ReplyDelete